footer_bg

Products

Hello, Welcome To ZINDN!

silicone high temperature resistant

2K product is composed of silicone resin, special temperature-resistant and anti-corrosion pigments, additives, organic solvents, etc.


Product Detail

Product Tags

Features

Long term temperature resistant 400℃-1000℃,drying at room temperature.

Silicone High Temperature Resistant
Silicone High Temperature Resistant

Recommended use

Used for high-temperature anti-corrosion on the outer wall of blast furnaces, hot blast stoves, and chimneys, flues, exhaust pipes, high-temperature hot gas pipes, heating furnaces, heat exchangers and other metal surfaces that require high-temperature anti-corrosion protection.

Application Instructions

Applicable Substrate and Surface Treatments:
Use a suitable cleaning agent to remove all grease and dirt on the substrate surface, and keep the surface clean, dry and pollution-free.
Blasted to Sa.2.5 (ISO8501-1) or power-treated to St3 standard, surface profile of 30μm~75μm (ISO8503-1) is the best. Best to apply primer within 4 hours of blast cleaning.

Applicable and Curing

1.Ambient environment temperature should be from minus 5℃ to 35℃, the relative air humidity should not be more than 80%.
2.Substrate temperature during application and curing should be 3℃ above dew point.
3.Outdoor application is prohibited in severe weather such as rain, fog, snow, strong wind and heavy dust.

Applications

Airless spray and air spray
Brush and rolling are only recommended for stipe coat, small-area coating or touch up. And soft-bristled brush or a short-bristled roller recommended to reduce air bubbles.

Application parameters

Application method Unit Airless spray Air spray Brush/Roller
Nozzle orifice mm 0.38~0.48 1.5~2.0 ——
Nozzle pressure kg/cm2 150~200 3~4 ——
Thinner % 0~3 0~5 0~3

Recommended coating & DFT
2 layers: 40-50um DFT by airless spray
Preceding & Consequent coat
Preceding paint: Inorganic zinc-rich primer, please consult Zindn

Precautions

During application, drying and curing period, the relative humidity shall not exceed 80%.

Packaging, Storage and management

Packing:base 20kg,curing agent 0.6kg
Flash point:>25℃(Mixture)
Storage : Must be stored in accordance with local governmental regulations. The storage environment should be dry, cool, well-ventilated and away from heat and fire sources. The packaging barrels must be kept tightly closed.
Shelf life:1 year under good storage conditions from time of production.


  • Previous:
  • Next: